Search Results

During the summer I was trying to figure out the best way to organize the huge amount of stuff I had at ITP into the three small personal stora...

Gandhi once said, "Be the change that you want to see in the world." Folding 4X5 cameras are too expensive. And the really cheap ones can not ...

By Simon Pinter We have all sorts of fun toys to play with at the AMS, on a daily basis. My personal favorite is our ICG 380 drum scanner. Without...

While many may think that we at the AMS sit around in the summer plotting ways to make students' lives more difficult with new guidelines, the tru...

[IMG_9578.jpg] The voronoi truss, or vTruss, was executed as both a display piece for the ITP Spring 2008 Show as well as a prototype for future r...

This is a pendant light laser cut from 1/4" Mahogany wood and 1/4" ivory acrylic. The assembly involves no cutting or gluing and the light i...

With a simple plastic strip heater it is possible to create professional shelves or other fixtures from acrylic material. In this instance, the ...

A video of the laser in vector mode; cutting through 1/2" acrylic. [d9387.jpg] Click here to view video

Investigation of Circuits Etching Part I Investigation of Circuits Etching Part II Armed with new information gleaned from Mark Johnson ...

These are etching tests done on the backside of a glass mirror. Settings from top to bottom are as follows. 30,80,1000; 100,80,1000; 75,80,1000;...

Designing assemblies in a 2D program like Illustrator can be a difficult task, especially when the design involves many parts that fit toget...

Illustrator's built in round corners filter will only round all corners of an object with the same degree of rounding applied to each corner. Fo...

Below are the results from submerging copper-clad boards with resist patterns in a ferric chloride acid bath.  I've chosen to etch only the acry...

With the purchase of our new Universal Laser PLS6 laser marking and etching system, I was hopeful that using the new higher power lens ...

This project was submitted by Danny Rozin on 11/06/07 under Job Order J00165.  Danny Rozin built the 3D file used to generate the mo...

Off-Focus etching of print plates allows for thick vector lines without having to resort to a much slower raster etch technique. By controll...

The following is a procedure for creating double sided etches that must align on each side of the material and applies to transparent surfaces s...

Using the new Universal Laser PL6.60 in conjunction with the High Power Density Focusing Optics (HDPFO), etching glass is now possible. Settings...

Welcome to your wiki.<ul><li>To create a new page, click the New Page (+) button.</li><li>To edit a page, click the Edit (pencil) button.</li><li>To change wiki settings, log in as a group owner or administrator, click Settings, then click the Edit (pencil) button.</li></ul>For more information about using the wiki, click Help at the bottom of the page.