This is a pendant light laser cut from 1/4" Mahogany wood and 1/4" ivory acrylic. The assembly involves no cutting or gluing and the light i...
A video of the laser in vector mode; cutting through 1/2" acrylic. [d9387.jpg] Click here to view video
Investigation of Circuits Etching Part I Investigation of Circuits Etching Part II Armed with new information gleaned from Mark Johnson ...
These are etching tests done on the backside of a glass mirror. Settings from top to bottom are as follows. 30,80,1000; 100,80,1000; 75,80,1000;...
Designing assemblies in a 2D program like Illustrator can be a difficult task, especially when the design involves many parts that fit toget...
Illustrator's built in round corners filter will only round all corners of an object with the same degree of rounding applied to each corner. Fo...
Below are the results from submerging copper-clad boards with resist patterns in a ferric chloride acid bath. I've chosen to etch only the acry...
With the purchase of our new Universal Laser PLS6 laser marking and etching system, I was hopeful that using the new higher power lens ...
This project was submitted by Danny Rozin on 11/06/07 under Job Order J00165. Danny Rozin built the 3D file used to generate the mo...
Off-Focus etching of print plates allows for thick vector lines without having to resort to a much slower raster etch technique. By controll...
The following is a procedure for creating double sided etches that must align on each side of the material and applies to transparent surfaces s...
Using the new Universal Laser PL6.60 in conjunction with the High Power Density Focusing Optics (HDPFO), etching glass is now possible. Settings...
Your search for "alexandergibbons" in last author returned 12 results.